Lenze 8400 - Set Machine Parameters

3 Commissioning
3.8 Commissioning of the "Table positioning" technology application
72
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.8.4.1 Set machine parameters
1. Go to the right side of the Application parameter tab and click the Machine parameter button
to change to the Overview  Machine parameter dialog level:
 Note!
Setting the machine parameters is a basic prerequisite for the operating modes
"Homing
", "Manual jog" and "Positioning".
The more precisely the machine parameters are set, the better the results of positioning!
Detailed information on the machine parameters is provided in chapter "Basic drive
functions" in subchapter "Machine parameters
". ( 528)