Lenze 8400 - LsSeterror1

17 Function library
17.2 System blocks | LS_SetError_1
1559
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.2.31 LS_SetError_1
Parameterisable responses to user-defined events are tripped.
17.2.32 LS_SetError_2
Parameterisable responses to user-defined events are tripped.
17.2.33 LS_SyncManagement
Output of status information for synchronising the internal time base.
17.2.34 LS_TouchProbe
Interface for touch probe detection.
17.2.35 LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.
 For a detailed description see the main chapter "Diagnostics & error management":
"LS_SetError_1" system block
( 680)
 For a detailed description see the main chapter "Diagnostics & error management":
"LS_SetError_2" system block
( 681)
 For a detailed description see main chapter "Synchronisation of the internal time base of
the inverter":
Internal interfaces | System block "LS_SyncManagement"
( 788)
 For a detailed description see the main chapter "I/O terminals":
Touch probe detection
( 357)
 For a detailed description see the main chapterl "Parameter change-over". ( 789)