Lenze 8400 - Functional Settings

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 555
8 Basic drive functions (MCK)
8.6 Homing
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.6.1.1 Functional settings
From version 14.00.00, various functional settings for homing can be carried out bit-coded in
C01220/1
.
Function Lenze setting
Bit 0 Reserved Off
Bit 1 Reserved Off
Bit 2 Reserved Off
Bit 3 Reserved Off
Bit 4 Start deletes bHomePosAvailable
When homing is started (mode 4 ... 15), the reference information is deleted.
Off
Bit 5 Maximum jerk
Setting or activation of maximum jerk for traversing profiles
( 550)
Off
Bit 6 Reserved Off
...
Bit 15