Lenze 8400 - Page 1530

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 1530
17 Function library
17.2 System blocks | L_Transient_8
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Related topics:
Overview of function blocks available
( 1243)
Working with the FB Editor
( 1191)
LS_ParFree32 Output of 8 parameterisable 32-bit signals
• This SB is available from version 11.00.00.

LS_ParFreeUnit
LS_ParFreeUnit_2
Output of 16 parameterisable position signals with internal
conversion of [unit] in [increments]
• These SBs are available from version 11.00.00.

LS_ParReadWrite_1
...
LS_ParReadWrite_6
Reading/Writing of local parameters
• These SBs are available from version 04.00.00.

LS_PulseGenerator
Output of 9 fixed frequencies and 1 parameterisable frequency 
LS_RetainData
Selection and saving of retain data
• This SB is available from version 11.00.00.

LS_SetError_1
Parameterisable responses to user-defined events are tripped
Diagnostics & error management
( 623)

LS_SetError_2

LS_SyncManagement
Output of status information for synchronising the internal time
base
Synchronisation of the internal time base
( 787)

LS_TouchProbe
Interface for touch probe detection
Touch probe detection
( 357)
• This SB is available from version 06.00.00.

LS_WriteParamList
Interface to the basic "Parameter change-over" function
Parameter change-over
( 789)
• This SB is available from version 04.00.00.

System block Function
can be inserted into
level:
I/O Appl.