Parameter Name / value range / [default seng] Info
0x401F:003
(PAR 121/003)
Process contr
oller diagnoscs: Status
(PID diagnoscs: PID status)
•
Read only
Bit-coded status display of the process controller.
Bit 0 Process controller o
Bit 1 Process controller output set to 0
Bit 2 Process controller I-component set to 0
Bit 3 Process controller inuence is shown via
ramp
Bit 4 Setpoint = actual value
Bit 5 Idle state acve
Bit 6 Reserved
Bit 7
Conguring the process controller
Basic process controller sengs
141
To Next Page
Loading...
