Lenze i510 - Page 25

PAR Name / SUB xxx: Name Default seng Seng range Address
PAR 108 Output power
SUB 001: Eecve power x.xxx kW - (Read only) 0x2DA2:001
SUB 002: Apparent power x.xxx kW - (Read only
) 0x2DA2:002
PAR 109 Output energy
SUB 001: Motor output
energy
x.xx kWh - (Read only) 0x2DA3:001
SUB 002: Gen. output energy x.xx kWh - (Read only) 0x2DA3:002
PAR 110 AI1 diagnoscs
SUB 001: AI1 terminal % x.x % - (Read only) 0x2DA4:001
SUB 002: AI1 scaled freq. x.x Hz - (Read only) 0x2DA4:002
SUB 003: AI1 scaled PID x.xx PUnit - (Read only) 0x2DA4:003
SUB 004: AI1 scaled torque x.xx % - (Read only) 0x2DA4:004
SUB 016: AI1 status - - (Read only) 0x2DA4:016
PAR 111 AI2 diagnoscs
SUB 001: AI2 terminal % x.x % - (Read only) 0x2DA5:001
SUB 002: AI2 scaled freq. x.x Hz - (Read only) 0x2DA5:002
SUB 003: AI2 scaled PID x.xx PUnit - (Read only) 0x2DA5:003
SUB 004: AI2 scaled torque x.xx % - (Read only) 0x2DA5:004
SUB 016: AI2 status - - (Read only) 0x2DA5:016
PAR 112 AO1 value
SUB 001: Analog outp.1 volt. x.xx V - (Read only) 0x2DAA:001
SUB 002: Analog outp.1
current
x.xx mA - (Read only) 0x2DAA:002
PAR 117 Heatsink temp.
SUB 001: Heatsink temp. x.x °C - (Read only) 0x2D84:001
P
AR 118 Dig.inp. status - - (Read only) 0x60FD
PAR 119 Keypad status - - (Read only) 0x2DAC
PAR 120 Int. HW states - - (Read only) 0x2DAD
PAR 121 PID diagnoscs
SUB 001: Curr. PID setp. x.xx PUnit - (Read only) 0x401F:001
SUB 002: Curr. PID feedb. x.xx PUnit - (Read only) 0x401F:002
SUB 003: PID status - - (Read only) 0x401F:003
PAR 123 Mot. I2t ulis. x % - (Read only) 0x2D4F
PAR 125 Inverter diag.
SUB 001: Acve ctrl - - (Read only) 0x282B:001
SUB 002: Acve setpoint - - (Read only) 0x282B:002
SUB 003: LCD icon status - - (Read only) 0x282B:003
SUB 004
: Drive mode - - (Read only) 0x282B:004
SUB 005: Netw. contr.reg. - - (Read only) 0x282B:005
SUB 006: Netw. setp.reg. - - (Read only) 0x282B:006
PAR 126 Status words
SUB 001: Cause of contr.
inhibit
- - (Read only
) 0x282A:001
SUB 002: Cause of QSP - - (Read only) 0x282A:002
SUB 003: Cause of stop - - (Read only) 0x282A:003
SUB 005: Device status - - (Read only) 0x282A:005
PAR 135 Device ulisaon
SUB 004: Ixt ulisaon x % - (Read only) 0x2D40:004
SUB 005: Error response Error [3] Selecon list 0x2D40:005
PAR 150 Acve error - - (Read only) 0x603F
PAR 151 Timer/counter
SUB 001: Operang me x s - (Read only) 0x2D81:001
SUB 002: Operang me x s - (Read only) 0x2D81:002
SUB 003
: CU oper. me x ns - (Read only) 0x2D81:003
* Default seng depending on the size. Firmware-Version 01.01.01.00
Commissioning
Keypad paramet
er list
25
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com