Lenze i510 - Page 51

Parameter Name / value range / [default seng] Info
1 Analog input 1
2 Analog input 2
3 Keypad Setpoint
4 Digital frequency via DIx Frequency setpoint at digital input 1.
5 Network Setpoint
11 Preset setpoint 1 Preset values 1 … 15
12 Preset setpoint 2
13 Preset setpoint 3
14 Preset setpoint 4
15 Preset setpoint 5
16 Preset setpoint 6
17 Preset setpoint 7
18 Preset setpoint 8
19 Preset setpoint 9
20 Preset setpoint 10
21 Preset setpoint 11
22 Preset setpoint 12
23 Preset setpoint 13
24 Preset setpoint 14
25 Preset setpoint 15
31 Preset segm. val. 1 "Sequencer" funcon
32 Preset segm. val. 2
33 Preset segm. val. 3
34 Preset segm. val. 4
35 Preset segm. val. 5
36 Preset segm. val. 6
37 Preset segm. val. 7
38 Preset segm. val. 8
39 Last segment
50 Motor potenometer "Motor potenometer" funcon
99 Tes
t setpoint
0x282B:003
(PAR 125/003)
Inverter diagnoscs: Keypad LCD status
(Inverter diag.: LCD icon status)
•
Read only
Bit-coded state of the keypad status displays.
Bit 0 LOC 1 ≡ local keypad control acve.
Bit 1 REM 1 ≡ remote control via terminals, network, etc. acve.
Bit 2 MAN 1 ≡ manual setpoint selecon via k
eypad acve.
Bit 3 Auto 1 ≡ automac setpoint selecon via terminals, network, etc. acve.
Bit 4 Set
Bit 5 Reserved -
Bit 6
Bit 7
0x282B:004
(PAR 125/004)
Inverter diagnoscs: Acve drive mode
(Inverter diag.: Drive mode)
•
Read only
Display of the acve drive mode.
0 Speed mode Speed mode acve.
1 Process controller mode Process controller mode acve.
3 Test mode (in
ternal) Test mode acve.
4 Jog operaon "Foward jog (CW)" or "Backward jog (CCW)" funcon acve.
0x2831 Lenze status word
•
Read only
Bit-coded status word of the internal motor control.
Bit 0 Reserved -
Bit 1 Speed 1 limited 1 ≡ input of speed controller 1 in limitaon.
Bit 2 Speed limited 1 ≡ output of speed controller 1 in limitaon.
Bit 3 Torque limited 1 ≡ setpoint torque in limitaon.
Bit 4 Current limited 1 ≡ setpoint current in limitaon.
Diagnoscs and fault eliminaon
Diagnoscs
Inverter diagnoscs
51
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com