Lenze i510 - Page 79

Parameter Name / value range / [default seng] Info
0x2947:007 Inverter characterisc: y7 = U7 (x = 37.50 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:008
Inverter characterisc: y8 = U8 (x = 42.75 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:009 Inverter characterisc: y9 = U9 (x = 50.00 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:010
Inverter characterisc: y10 = U10 (x = 56.25 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:011
Inverter characterisc: y11 = U11 (x = 62.50 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:012 Inverter characterisc: y12 = U12 (x = 68.75 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:013 Inverter characterisc: y13 = U13 (x = 75.00 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:014 Inverter characterisc: y14 = U14 (x = 81.25 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:015 Inverter characterisc: y15 = U15 (x = 87.50 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:016 Inverter characterisc: y16 = U16 (x = 93.25 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2947:017 Inverter characterisc: y17 = U17 (x = 100.00 %)
0.00 ... [0.00]* ... 20.00 V
•
Default seng depending on the size.
0x2C01:001
Motor parameters: Number of pole pairs
•
Read only
Display of the number of pole pairs calculated from the rated speed and
rated frequency.
0x2C01:002 Motor parameters: Stator resistance
0.0000 ... [10.1565]* ... 125.0000 Ohm
•
Default seng depending on the size.
General motor parameters.
Carry out sengs as specied by manufacturer data/motor data sheet.
0x2C01:003 Motor parameters: Stator leakage inductance
0.000 ... [23.566]* ... 500.000 mH
•
Default seng depending on the size.
0x2C01:004
(PAR 320/004)
Motor parameters: Rated speed
(Motor parameters: Mot. speed)
50 ... [1450] ... 50000 rpm
General motor parameters.
Carry out sengs as specied by motor nameplate data.
0x2C01:005
(PAR 320/005)
Motor parameters: Rated frequency
(Motor parameters: Mot. frequency)
1.0 ... [50.0] ... 1000.0 Hz
0x2C01:006
(PAR 320/006)
Motor parameters: Rated power
(Motor parameters: Motor power)
0.00 ... [0.25]* ... 655.35 kW
•
Default seng depending on the size.
0x2C01:007
(PAR 320/007)
Motor parameters: Rated voltage
(Motor parameters: Motor voltage)
0 ... [230]* ... 65535 V
•
Default seng depending on the size.
0x2C01:008
(PAR 320/008)
Motor paramet
ers: Cosine phi
(Motor parameters: Mot. cosine phi)
0.00 ... [0.80] ... 1.00
0x2C01:010 Motor parameters: Name
Motor control
Motor data
79
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com