Lenze i510 - Page 80

Parameter Name / value range / [default seng] Info
0x2C02:001
(PAR 351/001)
Motor paramet
er (ASM): Rotor resistance
(ASM motor par.: ASM rotor res.)
0.0000 ... [8.8944]* ... 200.0000 Ohm
•
Default seng depending on the size.
Equivalent circuit data of the motor required for the motor model.
0x2C02:002
(PAR 351/002)
Motor parameter (ASM): Mutual inductance
(ASM motor par.: ASM mutual ind.)
0.0 ... [381.9]* ... 50000.0 mH
•
Default seng depending on the size.
0x2C02:003
(PAR 351/003)
Motor paramet
er (ASM): Magnesing current
(ASM motor par.: ASM magn. current)
0.00 ... [0.96]* ... 500.00 A
•
Default seng depending on the size.
0x6075
(PAR 323)
Motor rat
ed current
(Motor current)
0.001 ... [1.700]* ... 500.000 A
•
Default seng depending on the size.
•
Seng can only be changed if controller inhibit is
acve.
The rated motor current to be set here serves as a reference value for
dierent parameters with a seng/display in percent.
Relevant parameters:
•
DC braking: Current 0x2B84:001 (PAR 704/001)
•
Flying restart circuit: Current 0x2BA1:001 (PAR 718/001)
•
Motor overload monitoring (i²*t): Maximum ulisaon [60 s] 0x2D4B:
001 (PAR 308/001)
•
Max current 0x6073 (PAR 324)
•
Current actual value 0x6078 (PAR 103)
0x6076
(PAR 325)
Motor rated torque
(Motor torque)
0.001 ... [1.650]* ... 1000.000 Nm
•
Default seng depending on the size.
•
Seng can only be changed if controller inhibit is
acve.
The rated motor torque to be set here serves as a reference value for
dierent parameters with a seng/display in percent.
Relevant parameters:
•
Torque actual value 0x6077 (PAR 107)
0x6080
(PAR 322)
Max motor speed
(Max. motor speed
)
0 ... [6075] ... 480000 rpm
Limitaon of the maximum motor speed.
Motor control
Motor data
80
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.actechdrives.com - Email: info@actechdrives.com