Driving
5.1 Before driving
Operating manual 3 302 736 en 5 - 9
GMK4090
xx.xx.xxxx
Checking the vehi-
cle height
The vehicle height given at on-road driving level is only maintained when
the main boom is resting in the boom rest;
à p. 1 - 8.
If the
Vehicle height check function is present, the position of the main boom
in the boom rest is monitored. In this case, a corresponding warning is
shown on the
CCS display if the main boom has not been correctly put
down;
à Main boom not set down, p. 8 - 16.
s
S
Risk of accidents by exceeding total permissible height
Check that the symbol is displayed.
Otherwise the indicated total height will also be exceeded at on-road level.
To Next Page
Loading...
Need help?
General
