Crane operation
11.9 Heating and air-conditioning system
11 - 154 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
Setting the tem-
perature
• Select the symbol (1).
• Set the desired temperature – symbol (2).
• Change and confirm the respective values
using the control units (3) or (4).
Setting the heat-
ing start/heating
duration
• Select a weekday – symbol (1).
• Set the starting time for the heating – sym-
bol (3). You can set up to three starting
times.
• Set the desired heating duration –
symbol (4). You can set a maximum heating
duration of 2 hours.
• Set the desired temperature – symbol (2).
• Change and confirm the respective values
using the controls (5) or (6).
To Next Page
Loading...
