Crane operation
11.9 Heating and air-conditioning system
Operating manual 3 302 736 en 11 - 155
GMK4090
xx.xx.xxxx
Switching heat-
ing start on/off
Switching on
• Select a storage location (for example, #1) –
symbol (1) red. You can also selected other
storage locations.
The auxiliary heating now starts at the times
stored in the corresponding column.
Switching off
• Select a storage location (e.g. #1) – symbol (1)
grey. You can also selected other storage loca-
tions.
• Change and confirm the respective values
using the controls (2) or (3).
To Next Page
Loading...
