Rigging work
12.4 Connecting/disconnecting the hand-held control
12 - 24 3 302 736 en Operating manual
GMK4090
xx.xx.xxxx
Functionality of the sockets
The hand-held control is only active when it is connected to the sockets (1)
or (2).
H
Switch off the engine. Pulling a bridging plug will shut the engine off, but
this action is only designed for emergencies.
The ignition can be switched on or off.
Socket Enabled operations
1
– Emergency operation for crane movements
(except for telescoping mechanism)
– Derrick lattice extension
1)
2 – Emergency mode for crane operations
1)
Additional equipment
To Next Page
Loading...
Need help?
General
