Driving with a rigged truck crane
13.5 Driving from the crane cab
Operating manual 3 302 736 en 13 - 23
GMK4090
xx.xx.xxxx
Steering with separate steering – automatic
The symbol (2) or (3) is displayed for the desired steering mode.
• Steer the 1st and 2nd axle lines with the button (1).
The axle lines are steered as long as you keep the button pressed or until an
end position is reached.
The electronics will register the steering angle on the 1st and 2nd axle lines
and steer the wheels of the 3rd and 4th axle lines correspondingly.
(A) – When driving around corners
The 3rd and 4th axle lines are steered in line
with the turning radius, contrary to the steer-
ing angle of the 1st and 2nd axle lines.
(B) – For crab travel mode
The 3rd and 4th axle lines are steered in the
same direction as the 1st and 2nd axle lines.
s
– To turn to the left: • Press button (1) to the left.
– To turn to the right:
• Press button (1) to the right.
To Next Page
Loading...
Need help?
General
