EasyManua.ls Logo

MIMAKI UJF-3042 - Page 22

MIMAKI UJF-3042
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
3
4
5
6
7
8
© 2011 MIMAKI ENGINEERING CO.,LTD. 1.2.9 R.2.0 P.1
Maintenance Manual > Operating Principle > Maintenance Function > CUSTODY WASH
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
1.2.9 CUSTODY WASH
Indication on LCD
Processing sequence
For other than the “service mode”, to prevent dryness of the nozzle surface and inside the cap, the warning sound
beeps at intervals of 30 seconds during carriage out.
STEP. Processing Description
1Start
1. The Y bar comes to the front.
2. Performs cap OFF and moves the head to the maintenance position.
3. The wiper comes to the front.
2 Performing maintenance
(Indicate 1)
1. The wiper pump operates periodically while maintenance is being performed.
2. Message of maintenance is completed is displayed. Terminate with the [ENTER].
3 Entering leaving time
(Indicate 2)
1. The wiper returns to the wiper origin position (aftermost).
2. The head caps ON.
3. The Y bar returns to the back.
4. Select the leaving time with the[5] [6] keys.
5. When you press the [ENTER] key, it enters in the waiting mode for the set leaving
time.
4 Waiting for leaving time
(Indicate 3)
1. It does not move with cap ON for the set leaving time.
2. After the set leaving time has passed, performs cleaning.
5 Cleaning
(Indicate 4)
1. Performs normal cleaning once.
2. By cleaning is terminated, nozzle cleaning is completed.
6 Start
1. The Y bar comes to the front.
2. Performs cap OFF and moves the head to the maintenance position.
3. Moves the table downward to the lowest position.
7 Performing maintenance
(Indicate 5)
1. The absorption pump operates periodically during maintenance is being performed.
(Absorbs for 5 seconds and leaves for 10 seconds.)
2. Message of maintenance is completed is displayed. Terminate with the [ENTER].
8 End
1. Absorbs for 20 seconds at last and the absorption pump stops.
2. The head caps ON.
MAINTENANCE
STATION <ENT>
STATION
MENT :CUSTODY WASH
Fill the liquid.
COMPLETED <ENT>
STATION
LEAVING : **min
STATION
LEAVING hh:mm
CLEANING ACTIVE
***---------------
Indicate 1
Indicate 2
Indicate 3
Indicate 4
STATION
COMPLETED <ENT>
Indicate 5

Table of Contents

Related product manuals