11 Measurement and Report
Operator’s Manual 11 - 5
• Location (Prox./Mid./Dist.): belongs to items (e.g., vascular) that contain measurements of
Proximal, Middle or Distal parameters.
Measurement Tool
There are two types of measurement tools.
• Basic tools: the measurement tools for Basic Measurements which are general and have no
specific clinical definitions. Examples include “Distance” and “Area”.
• Advanced tools: the measurement tools for Advanced Measurement. These items are classified
and combined in clinical advanced packages according to the exam mode. For example, HC
(head circumference) in the Obstetric measurements is one of the advanced tools.
Measurement Method
Some measurement tools have multiple methods to select.
1. Select item in the menu.
2. Tap the box on the right side of the item to select the method.
Other Features
11.2 Measurement, Calculation and Study
There are three kinds of measurement items.
Measurement
Results of measurements are directly obtained via the measurement tools, which are indicated by
“ ” in the preset screen.
For example, “Distance” in the 2D general measurement or “HC” in the OB measurement.
On the touch screen, measurement tools are displayed using square button.
Calculation
Results of calculations are automatically derived by the system using other measured or calculated
values as parameters, they are indicated by “ ” in the preset screen.
For example, EFW (Estimated Fetal Weight) in the OB measurement.
If all measurements related to a calculation tool are completed, the system will automatically
calculate the result. If some measurement tools are performed again, the system will automatically
update the calculation result using the latest measurement results.
Features Descriptions
Current measurement
tool/item
Highlighted in blue.
Measured item A performed advanced item/tool is marked with a “√.” (If all items in a
submenu (extended menu) of a study are already performed, this study
will be marked as measured.)
NOTE:
Tap on "√" ahead of the measured item/tool, and tap [Delete] from
the menu popped up, the measure caliper and results in the result
window and report will be cleared.
To Next Page
Loading...
Need help?
General
