13 Patient Data Management
Operator’s Manual 13 - 5
13.3.2 Patient Data View & Management
Tap to select the desired patient exam in the list, you can:
Double-click the patient exam to enter review screen, you can check patient information data and
images.
13.3.3 Viewing Exam times
Tap [Options] > [Exam times statistics] to view the exam times counted by month.
13.4 Recycle bin
The recycle bin is used to store deleted patient data, exam data and images.
To recover deleted patient data, tap in the top-right corner of the screen and select to enter
the Patient Recycle Bin screen.
1. Select items in the list. Select operations:
– Tap [Restore Items] to restore the item to iStation.
– Tap [Delete] to delete the item permanently. The item can never be restored again.
2. Tap [Done] to exit the screen.
13.5 iStorage
Network storage is used to save image files and measurement reports to the remote PC server.
Item Description
Delete Exam Select an exam record, tap [Delete] to delete the record. You cannot delete
patient data which is being printed, exported or sent, or delete the current exam.
Backup/
Restore
You can back up the selected patient data to the system-supported media in order
to view it on PC, or restore the patient data to the system from an external media.
• [Options] > [Back Up]: back up the selected patient data to the system-
supported media.
• [Options] > [Restore]: import patient data from an external media.
• [Options] > [Export LEO]: export the LEO result of the selected patient
exam.
Send Exam The system supports sending data to external memory devices, print or iStorage.
You can use this function to export the exam data to external devices (in PC data
or DICOMDIR data format) and then import to PC or restore to the ultrasound
system to review the data (DICOMDIR).
1. Select the patient record, tap [Send To] to send exam data and images of the
selected record.Select from the destination, and set related settings.
2. Select from the destination, and set related settings.
Activate an
Exam
After you select an exam, which has been performed within 24 hours, tap
[Options] > [Activate] to activate the exam and load the basic patient
information and measurement data to continue the exam.
If you want to select a patient data in an external memory database to start a new
exam or recover the exam, you have to first allow the system to load the patient
data to the system’s patient database.
Query/Retrieve DICOM Query/Retrieve function, see “14 DICOM/HL7” for details.
To Next Page
Loading...
Need help?
General
