Operator’s Manual D - 1
D iScanHelper
By providing the referential information, such as, the ultrasonic image, the anatomic graphic,
scanning pictures/other scanning tips or diagnosis comments, the system helps the doctors to
operate the scanning by iScanHelper. Furthermore, it is a good platform for the self-learning and
training of ultrasound scanning technique for doctors. The system also plays a role in the assistant
software system in fulfilling training and education.
THIS “iScanHelper” IS FOR REFERENCE OR TUTORIAL PURPOSES ONLY, AND THE
MANUFACTURER WILL NOT BE LIABLE FOR DAMAGES AND/OR OTHER
UNDESIRABLE CONSEQUENCE IN ANY KIND THAT MAY OCCUR TO THE PATIENT OR
THE USERS BY USING THE SOFTWARE.
iScanHelper feature is available under abdominal, gynecological, obstetrical.
D.1 Use iScanHelper for Reference
Perform the following procedure:
1. Perform ordinary scanning procedure.
2. Tap in the top-right corner of the screen and select [iScanHelper] to enter iScanHelper
status.
3. Select the target view name in the menu and tap to see the details.
4. Swipe the menu to select the view.
5. Perform scanning according to information displayed on the help information area.
You can zoom in a single window in the help information area to see the window more clearly.
For details, see “D.3.3 Single/quad-window Display”Single/quad-window Display.
6. Tap [Exit] or on the operating panel to exit.
D.2 Use iScanHelper for Learning or Training
Perform the following procedure:
1. Switch to the exam modes that support iScanHelper.
2. Tap in the top-right corner of the screen and select [iScanHelper] to enter iScanHelper
status.
3. Learn and practise views by system defaulted sequence according to the information displayed
on help information area; or select unfamiliar views to practise.
You can zoom in a single window in the help information area to see the information. For
details, see “D.3.3 Single/quad-window Display”Single/quad-window Display.
To Next Page
Loading...
Need help?
General
