4 Setup
Operator’s Manual 4 - 5
4.1.5 OB
Perform the following procedure:
1. Set the default formula.
a. On the [Fetal Gestational Age] or [Fetal Weight] page, select an OB Item in the left
column.
b. Select a formula in the right column.
On the [Fetal Gestational Age] page, select whether to display the SD or EDD in the obstetric
result.
2. Set the fetal weight display.
a. Enter the [Fetal Weight] page.
b. Tap [Fetal Weight Unit].
Select Metric, English or English & Metric from the drop-down list.
c. Select the formula for calculating the weight percentile.
Select the formula from the drop-down list of [EFW-GP].
3. Tap [Save] to confirm.
4.1.6 Key Configuration
Footswitch Function
You can assign a function to the left/middle/right key of the foot switch here.
Key Function
You can set the functions for the user-defined keys from the drop-down list.
4.1.7 Option
The system enters the Option page after entering the Maintenance screen. In the Option list, the
system lists all the system-supported options and their installation status (not installed or installed).
To install and uninstall:
• Tap [Install] to begin installing a disabled option.
• Tap [Uninstall] to begin uninstalling a previously-installed option.
Please contact the Mindray Customer Service Department or a sales representative for details.
4.1.8 Access Control
The system supports two types of users: administrator and operator.
• Administrator
The system administrator can access all function modules, and view all patient data, such as
patient information, images and reports, etc. Only one administrator is configured by default.
The administrator can add or delete operators.
•Operator
Measure Unit Setting To set the units of measure items in batches.
Item Description
To Next Page
Loading...
Need help?
General
