2 - 12 Operator’s Manual
2 System Overview
2.10.4 iVocal
• If the microphone is not to be used for the moment, you can put the microphone into the vacant
probe holder temporarily.
• When the iVocal function is enabled, the system can perform operations both through inputting
vocal commands and through tapping icons on the touch screen.
• The ultrasound system can automatically recognize some vocal commands. For details about
the vocal commands.
• Currently, only wireless microphone devices can be inserted to the system for inputting vocal
commands.
Before enabling the iVocal function, ensure that the microphone device and the ultrasound system
is properly connected through the USB extension wire.
Inputting vocal command
Perform the following procedure:
1. Tap the icon in the Audio Control menu to start the vocal command recognition.
2. Input a vocal command using the microphone, and after the command is recognized, the
system automatically performs the corresponding operation.
To Next Page
Loading...
Need help?
General
