2 - 2 Operator’s Manual
2 System Overview
• According to the degree of protection against harmful ingress of water:
– The main unit is rated as IPX0
– The probes are rated as IPX7
– The foot switch (can be applied in the operating room) is rated as IPX8
– The power adapter is rated as IPX1
• According to the disinfection and sterilization method(s) recommended by manufacturer:
Equipment with disinfection and sterilization method(s) recommended by manufacturer.
• According to the degree of safety of application in the presence of a FLAMMABLE
ANESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE
EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC
MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE
• According to the mode of operation:
Continuous operation
• According to the installation and use:
Portable equipment
Mobile equipment (when the system is installed on the mobile trolley)
• Does the equipment has any defibrillation-proof applied parts:
Non-defibrillation-proof applied part
• Permanently installed equipment or non-permanently installed equipment:
Non-permanently installed equipment
2.4 Product Specifications
The functions described in the operator’s manual may vary depending on the specific system
purchased.
2.4.1 Power supply
• Voltage: 100 V - 240 V AC
• Frequency: 50/60 Hz
• Power input:
– Main unit: 2.0 A
– UMT-400 power input: 5.4-2.6 A
– HMT-600 power input: 4.4-2.5 A
• Battery voltage: 14.8 V
2.4.2 Environmental Conditions
• Operating conditions
– Ambient temperature: 0 °C to 40 °C
– Relative humidity: 30% to 85% (no condensation)
– Atmospheric pressure: 700 hPa to 1060 hPa
• Storage and transportation conditions
– Ambient temperature: -20 °C to 55 °C
To Next Page
Loading...
Need help?
General
