A Barcode Reader
Operator’s Manual A - 9
Configuration before use
Perform the following procedure:
1. Scan the following 1-D barcode to configure the barcode reader:
2. Scan the following 1-D barcode to enable the suffix:
Reset the barcode reader
Perform the following procedure:
1. If the barcode reader is in malfunction, scan the following 1-D barcode to reset to default
settings.
2. Follow the following steps to reconfigure the barcode reader:
a. Scan the following 1-D barcode to configure the barcode reader:
b. Scan the following 1-D barcode to enable the suffix:
c. Scan the following 1-D barcode to disable the prefix:
To Next Page
Loading...
Need help?
General
