Mindray V Series - Page 149

Alarm Responses Alarms
8 - 16 V Series Operating Instructions
8.3.7.6 Oximetry Tab
TABLE 8-14 lists the available alarm levels for the SpO
2
parameter in the Oximetry tab.
NOTE: For the rSO
2
alarm responses, refer to the Addendum to V Series
Operating Instructions for additional information.
8.3.7.7 Neuro Tab
TABLE 8-15 contains the alarm responses for the BIS parameter.
TABLE 8-14
ALARM LEVELS*
FACTORY
DEFAULT ALARM RESPONSES
ALARM LEVELS
BUTTON HIGH MEDIUM LOW
PRINT ON
ALARM
SAVE TO
EVENT
NURSE
CALL
SpO2 X X** _OffOnOff
* X indicates available alarm level, — indicates alarm level not available
** The factory default configuration settings are in bold.
TABLE 8-15
ALARM LEVELS*
FACTORY
DEFAULT ALARM RESPONSES
ALARM LEVELS
BUTTON HIGH MEDIUM LOW
PRINT ON
ALARM
SAVE TO
EVENT
NURSE
CALL
BIS — X X** Off On Off
* X indicates available alarm level — indicates alarm level not available
** The factory default configuration settings are in bold.