Minebea Intec PR5900 - Page 157

WP-C R1 Max 29.9kg d= 0.0005kg
00000
+
kg
xBPI Interface parameters @admin
Communication type
Baudrate for SBI
Parity for SBI
Stop bits
Handshake
Print in weighing mode
SBI protocol
9600 baud
odd parity
1 stop bit
software handshake
On requ always
Save
SBI protocol:
[Baudrate für SBI]
Selection: 150, 300, 600, 1200, 2400, 4800, 9600, 19200 baud
[Parity for SBI]
Selection: Parity mark, Parity space, odd parity, even parity
[Stop bits]
Selection: 1 stop bit, 2 stop bits
[Handshake]
Selection: software handshake, CTS with 2 characters, CTS with 1 character
[Print in weighing mode]
Selection: On requ always, On requ when stab, On requ with store, auto, auto when
stable
[auto print]
Selection: Start/stop by ESCP, not stoppable
[Output format]
Selection: without ID 16 bytes, with ID 22 bytes
[Data output interval]
Selection: each display cycle, after 2, 5, 10, 20, 50, 100 updates
[Parameters change]
Selection: Can be changed, Cannot be changed
xBPI protocol:
[Data output interval]
Selection: each display cycle, after 2, 5, 10, 20, 20, 50, 100 updates
[Parameters change]
Selection: Can be changed, Cannot be changed
2. Select [Communication type] and conrm.
3. Select [SBI protocol] or [xBPI protocol] and conrm.
4. Select and conrm the individual parameters according to the choice.
4 System setup Process Controller Maxxis 5 PR 5900
EN-155 Minebea Intec