Minebea Intec PR5900 - Page 325

Update software from USB stick
Installed software
PR5900-Bios 00.02.00.138280
PR5900-Firm 00.02.00.138404
PR5900-Basic 01.00.06.4464
No labels installed.
Select software to update from
PR5900-r01-Bios 02.11.00.208007
PR5900-r01-Firm 02.11.00.208007
PR5900-Appl-Basic 01.00.04.28
2012-08-13-13:51:51
2012-08-14-06:04:36
2012-08-13-15:23:23
2014-04-28-12:34:01
2014-04-28-12:34:01
2014-03-28-11:44:03
No labels retained
Start
The software installed on the device and available on the USB stick is listed.
If dierent versions are available, the version to be installed can be selected.
Note:
Checking the versions: If e.g. 02.10 rmware is to be combined with a 02.00 BIOS,
the update cannot be started.
Update software from USB stick
Installed software
PR5900-Bios 00.02.00.138280
PR5900-Firm 00.02.00.138404
PR5900-Basic 01.00.06.4464
No labels installed.
Select software to update from
PR5900-r01-Bios 02.11.00.208007
PR5900-r01-Firm 02.11.00.208007
PR5900-Appl-Basic 01.00.04.28
2012-08-13-13:51:51
2012-08-14-06:04:36
2012-08-13-15:23:23
2014-04-28-12:34:01
2014-04-28-12:34:01
2014-03-28-11:44:03
No labels retained
Start
In this case: the BIOS and rmware must be updated and the application must be
retained.
Update software from USB stick
Installed software
PR5900-r01-Bios 02.23.00-trunk.276015
PR5900-r01-Firm 02.23.00-trunk.276404[.
PR5900-Appl-XDSP 00.00.01.26
No labels installed.
Select software to update from
PR5900-Appl-H000449 00.00.01.152
2016-06-21-08:17:41
2016-07-01-06:04:35
2016-07-01-07:57:24
Retain current bios
Retain current firmware
2016-02-10-16:02:15
No labels retained
Start
Changes are not possible because
'Settings locked' has been set for
several W / M weighing points.
5. Select and conrm the third line.
6 System maintenance Process Controller Maxxis 5 PR 5900
EN-323 Minebea Intec