Minebea Intec PR5900 - Page 346

Test I/O-Cards @admin
1
2
3
Option-2
in use by PLC task
Test mode
Digital Outputs
Digital Inputs
PR5900/12 Digital I/O
1
External test
0000
0000
Monitor Intern Extern
Test mode 3 [External test] is active.
The physical inputs and outputs (hardware) are tested without the involvement of the
PLC (application), see Chapter 6.11.3.1.
An information window is displayed.
6. Press the EXIT key to return to the card test menu.
Process Controller Maxxis 5 PR 5900 6 System maintenance
Minebea Intec EN-344