Minebea Intec PR5900 - Page 80

During the input test using the keypad, pressing the key on the device swit-
ches between:
- in this case: Hepburn
- Numbers
- Uppercase letters
- Lowercase letters
[Screensaver]
Once the screensaver is switched on, operation is only possible once a password has
been entered or a key has been pressed.
Selection: [no screensaver], after 1 minute, after 5 minutes, after 10 minutes, after 30
minutes
[Keyclick sound]
Duration of acoustic signal when keys are pressed
Selection: no key click, [short key click], medium key click, long key click
[Cold start with STOP+EXIT]
NOTICE
Data loss
A cold start leads to a loss of all data in the database.
Back the data up rst if necessary.
Selection: [disabled], immediately, 3 s
[Software download]
Load and start a new application on the device via the network.
NOTICE
Possible production downtime!
This parameter must always be set to [disabled] for production systems.
Selection: [disabled], enabled
Software can only be downloaded in running operation when [enabled] has been
selected.
[Label/Language download]
Load labels and language les onto the device via the network.
5. Press the [OK] soft key to end the input test.
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-78