- Aperiodic lter
- Butterworth lter
- Tschebysche lter
A digital lter can be switched on only with the measurement time set to ≤160 ms
Selection: no lter, Bessel, aperiodic, Butterworth, Tschebysche.
If no particularly frequent uctuations are expected in ongoing operation, the
following settings are recommended:
- [Measurement time]: ≤160 ms
- [Digital lter]: aperiodic
- [Cuto frequency]: 2.00 Hz
4 System setup Process Controller Maxxis 5 PR 5900
EN-95 Minebea Intec
To Next Page
Loading...
