MKS 146C - How to Turn an Alarm on or off

How To Turn an Alarm ON or OFF Cha
p
ter Five: O
p
eration in Leaka
g
e Mode
132
How To Turn an Alarm ON or OFF
1. Repeatedly press the [
DISPLAY MODE
] key until the 146 unit is in Leakage Mode.
The system responds by scrolling through modes.
2. Press the [
ON
/
LEAD
] or [
OFF
/
GAIN
] key, followed by [A], [B], [C], or [D].
The system responds by enabling (press [
ON
/
LEAD
]), or disabling (press [
OFF
/
GAIN
]), the
selected alarm.
Note
Alarms A and B are standard with the 146 unit, but alarms C and D are
only available if the Auxiliary Output board is installed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com