MKS 146C - How to Adjust Miscellaneous Codes; Table 51: How to Adjust Miscellaneous Codes

Chapter Seven: Operation in Setup Mode How To Ad
j
ust Miscellaneous Codes
211
How To Adjust Miscellaneous Codes
There are many miscellaneous parameters that can be modified with the miscellaneous code
functions. Some miscellaneous codes refer to PID control and are, therefore, only in effect if the
Control board is installed.
The parameters in the miscellaneous code functions can be either selected or edited. The
procedures for parameter selection or editing are listed in Table 51.
How To Adjust Miscellaneous Codes
To select a parameter choice Use the [ ] and [ ] keys to scroll through the
choices in a parameter list. The [
ENTER
] key
causes the 146 unit to accept whichever parameter
choice is currently selected.
For entry of a numeric value Use the numeral keys, the [+/-] key, the arrow
keys, [
ZERO
/
EXP
], or [
SPAN
/.].
To toggle a display between On and Off Use the [
ON
/
LEAD
] and [
OFF
/
GAIN
] keys.
Table 51: How To Adjust Miscellaneous Codes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com