Chapter Nine: RS-232 Communications Command Messa
es
259
Command Messages
This section describes all of the RS-232 commands that can be received by the 146 unit. The
commands in this section are grouped by function. Refer to
Appendix G: Board Specific
Commands,
page 315, for a list of commands organized by
plug-in board
type.
Should an incorrect command message be sent, the 146 unit will return an error message. The
error messages, and their causes, are discussed in
Error Messages,
page 287.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
