Appendix G: Board Specific Commands General Information
315
Appendix G: Board Specific Commands
General Information
This appendix organizes the 146 commands by
plug-in board
type. It lists all the commands
necessary to operate each type of sensor. The plug-in boards covered include:
•
Capacitance Manometer
•
Pirani/Convection
•
Cold Cathode
•
Hot Cathode
•
Mass Flow Controller
•
Thermocouple
•
Auxiliary Output
•
Control
The commands are arranged in four groups: power, configuration, calibration, and status. Refer
to the body of the manual for an explanation of each command. Although this appendix lists the
RS-232 commands, the information applies to commands that are entered through both RS-232
and front panel operations.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
