Chapter Two: Installation How To Un
ack the 146 Instrument
23
Chapter Two: Installation
How To Unpack the 146 Instrument
MKS has carefully packed the 146 unit so that it will reach you in perfect operating order. Upon
receiving the unit, however, you should check for defects, cracks, broken connectors, etc., to be
certain that damage has not occurred during shipment.
Note
Do
not
discard any packing materials until you have completed your
inspection and are sure the unit arrived safely.
If you find any damage, notify your carrier and MKS immediately. If it is necessary to return the
unit to MKS, obtain an ERA Number (Equipment Return Authorization Number) from the MKS
Service Center before shipping. Please refer to the inside of the back cover of this manual for a
list of MKS Calibration and Service Centers.
Caution
Only qualified individuals should perform the installation and any
user adjustments. They must comply with all the necessary ESD and
handling precautions while installing and adjusting the instrument.
Proper handling is essential when working with all highly sensitive
precision electronic instruments.
Unpacking Checklist
Standard Equipment
•
The 146 Vacuum Gauge Measurement and Control System
•
Power cord
(If you choose to supply your own power cord you must ensure that it
complies with the applicable national regulatory requirements, such as UL or CSA.)
•
A set of self-adhesive labels for Alarm and Channel identification on the front panel of
the 146 unit
•
Instruction Manual (this manual)
Optional Equipment
•
Electrical Connector Accessories Kit, 146C-K1, (includes mating connectors for all the
connectors and two screwlock assemblies for each connector cover supplied)
•
Rack Mounting Kit
•
Interface Cables
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
