Chapter Five: Operation in Leakage Mode How To Cancel an MFC O
en/Close Override
147
How To Cancel an MFC Open/Close Override
An open or close override is canceled with the same sequence of steps.
1. Repeatedly press the [
DISPLAY MODE
] key until the 146 unit is in Leakage Mode.
The system responds by scrolling through modes.
2. Press either the
or key, followed by [
OFF
/
GAIN
], then [1], [2], [3], or [4].
The system responds by removing the open or close override for the MFC on the selected
channel. The MFC then performs as if no override had been given.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
