MKS 146C - Code 14 X: How to Select Control Settings; Figure 77: Code 14 X Display

Code 14x: How To Select Control Settings Cha
p
ter Seven: O
p
eration in Setu
p
Mode
234
Code 14x: How To Select Control Settings
RIGHT DISPLAY
LEFT DISPLAY
CLOSE
SETUP
CODE
The code number is
displayed and edited
here.
This number represents
the code number and the
number for the recipe which
you want to edit. In this
example, recipe 2 is selected
for editing.
MAIN DISPLAY
This display toggles between rEV (reverse) and
dir (direct) polarity.
Note:
The polarity applies to all recipes, regardless
of which recipe is selected in the left display.
The input channel number for the control
loop of the selected recipe is entered here.
In this example, input channel 1
provides the input in recipe 2.
Figure 77: Code 14x Display
This function requires the Control board.
The
x
in the code number represents a recipe number. This function selects the polarity (direct
or reverse), and the input channel used for control. By changing the input channel and then
editing a recipe (refer to
How To Edit Recipes
, in the
Operation in Tuning Mode
chapter), a
different input channel can be associated with each recipe.
Note
The polarity feature applies to
all
recipes, not just the selected recipe.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com