Chapter Five: Operation in Leakage Mode How To S
an a Pirani T
e Sensor to Atmos
here
139
1. Repeatedly press the [
DISPLAY MODE
] key until the 146 unit is in Leakage Mode.
The system responds by scrolling through modes.
2. Press the [
SPAN
/.] key, followed by [1], [2], [3], or [4].
The system responds by spanning the sensor on the selected channel number.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
