Chapter Six: Operation in Tuning Mode How To Ad
ust Start
167
2. Select the
START
parameter by scrolling through the parameters with the arrow keys.
The system responds by displaying each of the Tuning parameters as they are scrolled
through.
3. Press the [
ENTER
] key.
The system responds by causing the center display to blink.
4. Enter the Start value. The range is from 0 to 103% of full open, and the default is 0.
A. If the center display shows the correct Start value, press the [
ENTER
] key.
B. If the center display is not correct, use the numeral keys and arrow keys to enter
the correct Start value, then press the [
ENTER
] key.
The system responds by accepting the Start value.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
