MKS 146C - Page 192

Chapter Six: Operation in Tuning Mode How To Ad
j
ust Inte
g
ral
169
4. Enter the Integral value. The value must be between 0.02 and 100 (inclusive) seconds,
and the default is 0.3 seconds.
A. If the center display shows the correct Integral value, press the [
ENTER
] key.
B. If the center display is not correct, use the numeral keys and arrow keys to enter
the correct Integral value, then press the [
ENTER
] key.
The system responds by accepting the Integral value.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com