MKS 146C - Page 346

Appendix G: Board Specific Commands Hot Cathode Messa
g
es
323
Hot Cathode Messages (Continued)
Function Description Command Range and Restrictions
Calibration Span function @057<para>:<state> <para> is the channel number 1, 2, 3, or 4
<state> is ON for on; OFF for off
Sensor must be installed
Span with
reference
@055<para>:<ref> <para> is the channel number 1, 2, 3, or 4
<ref> is the reference channel number
Span function must be on
Span @053<para> <para> is the channel number 1, 2, 3, or 4
Command only -
Span function must be on
Status Report channel
condition
@608<para>? <para> is the channel number 1, 2, 3, or 4
Request only -
Sensor must be installed
Report reading
with time
stamp
@602<para>? <para> is the channel number 1, 2, 3, or 4
Request only -
Sensor must be installed
Report channel
reading
@601<para>? <para> is the channel number 1, 2, 3, or 4
Request only -
Sensor must be installed
Report sensor
ion current
@604<para>? <para> is the channel number 1, 2, 3, or 4
Request only -
Sensor must be installed
Report sensor
emission
current
@605<para>? <para> is the channel number 1, 2, 3, or 4
Request only -
Sensor must be installed
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com