Motorola G24 Guide User Manual

Call Control
3-50 AT Commands Reference Manual December 31, 2007
+MCST Parameters
The following table shows the +MCST parameters.
Example
AT+MCST?
+MCST: // <idle>
AT+MCST=1
OK
atd035684423;
+MCST: 17
OK
+MCST: 17
+MCST: 255
OK
Table 3-23: +MCST Parameters
<Parameter> Description
<n> 0 - Disable MCST unsolicited indication
1 - Enable MCST unsolicited indication
<state> 1 - Idle call state
2 - Single incoming call
3 - Single call active
4 - Multi-party call active
5 - Single call held
6 - Multi-party call held
7 - Dual call (fully connected active call and held call)
8 - Dual multi-party call active
9 - Dual multi-party call held
10 - Single active call plus call waiting
11 - Multi-party call active plus call waiting
12 - Single call held plus call waiting
13 - Multi-party call held plus call waiting
14 - Dual calls plus call waiting
15 - Dual multi-party calls active plus call waiting
16 - Dual multi-party calls held plus call waiting
17 - Call control busy
64 - Calling
68 - No Service
69 - No Redial
72 - Security Fail
<type> Phone number display format.
Type of address octet in integer format
(refer to GSM 04.08 [8] subclause 10.5.4.7)
129 Local number
145 International number with access character +
<alpha> Text representation of the phone book entry.
String type alphanumeric representation of <number> corresponding to the entry
found in the phone book.
Contains a string of up to 20 characters.

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English