TCP/IP
4-32 AT Commands Reference Manual December 31, 2007
+MIPSEND=1,A344343ABC343438980BC...AB4//Terminal disregards the Xoff request of G24 and keeps
sending //(Note: The terminal does not stop.)
ERROR 3
+MIPXON: 1 //G24 pushed the data into the protocol stack and is able to handle
more sends from the terminal
Error in Reopening a Valid Socket
AT+MIPCALL=1,"orange","test","test"
OK
+MIPCALL:123.145.167.230
+MIPOPEN=1,1222,"123.245.213.012",1234,0 //Opening socket 1 using TCP protocol, from port 1222,
targeting 123.245.213.012 port 1234
OK
+MIPOPEN:1,1
+MIPOPEN? //Terminal checking the status of socket to be ready
+MIPOPEN: 2 3 4
MIPOPEN=1,12,123.245.213.012,234,0//Terminal tries to reopen socket 1
ERROR
To Next Page
Loading...
Need help?
General
