Motorola G24 Guide - Firmware Update over the Air (FOTA); MFOTAWSCFG, Set the Web-Session Default Entry

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-265
Firmware Update Over the Air (FOTA)
+MFOTAWSCFG, Set the Web-Session Default Entry
This command is a basic command that enables Web-session default entry setting.
In MUX mode, this command is allowed on DLC2 only.
In order to enable a client to connect to a server (for example: Bitfone/ RedBend servers), default
Web-Session must be configured in the client.
All AT+ MFOTAWSCFG settings will be saved in nvm and the last setting will be available after
power up.
Command
Type Syntax Response/Action Remarks
Set
AT+MFOTAWSCFG =
<SERVICE_TYPE>,
<PORT>,
<GPRS APN>,
<GPRS USER NAME>,
<GPRS PASSWORD>
[,PROXY]
OK
or:
+CME ERROR: <err>
The set command configures the
tones mode.
Read
AT+MFOTAWSCFG? +MFOTAWSCFG:
<SERVICE_TYPE>,
<PORT>,
<GPRS APN>,
<GPRS USER NAME>
[,PROXY]
OK
The read command returns the
current setting.
Test
AT+MFOTAWSCFG =? +MFOTAWSCFG:(list of
supported
<Service_type>),
<port range>
OK
Test command returns the
supported service-types and the
port-range.