EasyManuals Logo

Motorola G24 Guide User Manual

Motorola G24 Guide
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Phone and Date Books and Clock
3-76 AT Commands Reference Manual December 31, 2007
+CPBF: 2,"8475767800",129,"Moto Voicemail"
+CPBF: 101,"+97252999080",145,"Voice Mail"
OK
AT+CPBF="Moto"
+CPBF: 2,"8475767800",129,"Moto Voicemail"
+CPBW, Write Phone Book Entry
This command enables the user to store a new entry in the phone book, or edit/delete an existing
entry from the phone book. A particular entry in the phone book can be stored, or the next
available entry is used.
This command writes the entry in the currently active phone book, selected with the +CPBS
command (Refer to “+CPBS, Select Phone Book Memory”, page 3-71). The entry is selected by
<index>, the phone number is entered into the <number> field and text associated with the
number is entered into the <text> field. If these fields are omitted, the phone book entry is
deleted. If the <index> field is omitted, but a number is entered in the <number> field, the phone
number is entered into the first available entry in the phone book. If the writing fails in a G24
error, +CME ERROR: <err> is returned.
The phone book and date book are share dynamic memory storage. If the writing fail in a G24
error in case of "full memory" error while the memory is not full by 'used' field of +CPBS
command (Refer to “+CPBS, Select Phone Book Memory” on page 3-71). It is recommended
checking the memory's capacity of the dynamic memory storage by +MPDPM command (Refer
to “+MPDPM, Motorola Phonebook Dynamic Percentage Memory” on page 3-85).
Note: The "FD" phone book supports single wild card characters (?) and prefixes of a number
in the telephone number field. In cases of fixed dialing, these entries in the "FD" phone
book define a group of permitted numbers.
Call indications related to a fixed dialing entry containing wild cards or only a prefix of
a number do not display any <alpha> identifier.
Command
Type
Syntax Response/Action Remarks
Set
AT+CPBW=[<index>][,
<number>
[,<type>[,<text>]]]
OK
or:
+CME ERROR: <err>
Test
AT+CPBW=? +CPBW: (list of
supported
<index>s),[<nlength>],
(list of supported
<type>s),[<tlength>]
OK
This command queries the
allowable command field and
sizes.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola G24 Guide and is the answer not in the manual?

Motorola G24 Guide Specifications

General IconGeneral
BrandMotorola
ModelG24 Guide
CategoryTelephone Accessories
LanguageEnglish

Related product manuals