Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-85
+MPDPM, Motorola Phonebook Dynamic Percentage Memory
This command returns the collective percentage of memory used by the phonebook and datebook
in their shared dynamic memory storage. A single percentage value is returned representing the
combined percentage used by both the phonebook and datebook.
The following table shows the +MPDPM parameters.
Example
AT+MPDPM?
+MPDPM: 0
OK
AT+CPBS="mt"
OK
AT+CPBR=?
+CPBR: (001-350),040,016
OK
AT+CPBR=1,100
OK
AT+CPBW=,"035658020",129,"Phone0"
OK
AT+CPBW=,"035658021",129,"Phone1"
OK
AT+CPBW=,"035658022",129,"Phone2"
OK
AT+CPBW=,"035658023",129,"Phone3"
OK
AT+CPBW=,"035658024",129,"Phone4"
OK
AT+CPBW=,"035658025",129,"Phone5"
OK
AT+CPBW=,"035658026",129,"Phone6"
Command Type Syntax Response/Action Remarks
Read
+MPDPM? +MPDPM: <n>
OK
or:
+CME ERROR: <err>
The Read command
queries the current
(combined) percentage
used by the phonebook
and datebook in their
shared dynamic memory
storage.
Table 3-44: +MPDPM Parameters
<Parameter> Description
<n> The percentage of memory used together by both the phonebook and datebook in their
shared dynamic memory storage.
To Next Page
Loading...
Need help?
General
