GPRS/EDGE
3-402 AT Commands Reference Manual December 31, 2007
MIPXON, Flow Control - Xon
This command is the unsolicited event that the G24 sends to the terminal when it detects that it
has free memory in the accumulating buffer and can process new +MIPSEND requests, after the
+MIPXOFF event.
Event
+MIPXON: <Socket ID>
Example
+MIPXON: 1 //The G24 pushed the data into the protocol stack on socket 1 and is able to handle more data
from the terminal.
To Next Page
Loading...
