Email
3-152 AT Commands Reference Manual December 31, 2007
Example:
AT+MEMAS=?
+MEMAS:(15),(48),(40),(100),(40),(0-65535),(40),(0-65535)
OK
AT+MEMAS="g24","g24motorola","g241234",
"g24motorola@nana.co.il","out.nana.co.il",25,"in.nana.co.il",110
OK
AT+MEMAS="g24","g24motorola","g241234","g24motorolananacoil","out.nana.co.il",25,"in.nana.co.il
",110
+CME ERROR: Invalid return address
AT+MEMAS?
+MEMAS:"g24","g24motorola","g241234","g24motorola@nana.co.il","out.nana.co.il",25,"in.nana.co.il
",110
OK
+MEMGS, Email Account General Settings
This command defines some usage general setting parameters for email service facility. In this
command User can determine:
1. If message will be saved on email server it has been downloaded to G24 memory.
2. The maximum size of the message to download.
3. The auto-signature to be added to the composed email messages body.
4. If message will be sent securely according to SSL protocol.
5. If message will be received securely according to SSL protocol.
<pop3_host> String format. Receiving host - IP addresses or host name for receiving email.
(pop3.test.com). Receiving host is a required setting. This setting must be set before
the user can access email. The definition of the Receiving Host setting follows the
guidelines as defined by RFC1035 (Domain names - implementation and
specification). The length of the Receiving Host setting is limited to 40 characters.
There is no default setting for receiving host. Receiving host address information shall
be provided by the email service provider. The receiving host is required setting. valid
characters are 'A'-'Z', 'a'-'z', '0'-'9', "-" and ".".
<pop3_port> Receiving port. Default value is 110. The minimum allow value is 0, the maximum
allowed value is 65535.
Table 3-91: +MEMAS Parameters (Cont.)
<Parameter> Description
To Next Page
Loading...
Need help?
General
