Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-113
Unsolicited Response
+CDSI: <mem>,<index>
The following table shows the +CDSI parameters.
Example
AT+CMGF=1
OK
AT+CSMP=49 /*Set Message type to Status Report, see +CMGW*/
OK
AT+CSMP?
+CSMP: 49,167,0,0
OK
AT+CNMI=0,0,0,2
OK
AT+CMGS="052468000"
> Hello
+CMGS: 188
OK
+CDSI: "SM",14
+CDS, Unsolicited Response (New SMS-STATUS-REPORT Receipt)
The +CDS unsolicited response is sent to the TE upon receipt of a new mobile-terminated SM if
the +CNMI parameter <ds> is set to ’1’. For further information, refer to “+CNMI, New Message
Indications to Terminal” on page 3-107.
This unsolicited message displays the received SMS-DELIVER message.
Unsolicited Response
In text mode: (+CMGF=1):
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st><CR><LF>
In PDU mode: (+CMGF=0):
+CDS: <length><CR><LF><pdu>
Table 3-63: +CDSI Parameters
<Parameter> Description
<mem> Message memory space. "SM" - SIM memory storage.
<index> Location of the new message.
To Next Page
Loading...
