EasyManuals Logo

Motorola G24 Guide User Manual

Motorola G24 Guide
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
SMS
3-134 AT Commands Reference Manual December 31, 2007
+CMGS, Send SM to Network
This command sends an SM from the G24 to the network. The message reference value <mr> is
returned to the G24 upon successful delivery of the message.
Valid <toda> will be any value between 128-255.
The header parameters in TEXT mode will be set according to CSMP settings.
The following table shows the +CMGS parameters.
Example
AT+CMGS="064593042",129
>This is the message body <CTRL+Z> //<CTRL+Z> ends the prompt text mode and returns to
regular AT command mode
OK
AT+CMGF=0
OK
AT+CMGS=24
>079179521201009511FF0B917962543940F20008001400410042004300440045 <CTRL+Z>
+CMGS: 128
OK
Note: Any character sent by TE to G24 before G24 has reported a result of AT+CMGS
operation, will abort AT+CMGS command execution. However, if SMS was already sent
to network and sending operation was successful, the result of operation "+CMGS <mr>"
will be reported by G24.
A flex dependant enhancement enables the reporting of numeric error code to TE, in case
the sending operation has failed. The numeric error code will be reported in format:
"+CMGS ERROR: <err>".
Command Type Syntax Response/Action Remarks
Set If text mode (+CMGF=1):
+CMGS=<da>[,<toda>]<CR>
text is entered<ctrl-Z/ESC>
If PDU mode (+CMGF=0):
+CMGS=<length><CR>
PDU is entered<ctrl-Z/ESC>
+CMGS: <mr>
+CMS ERROR: <err>
The Set command
validates the input
parameters, sends the
SM to network and
reports the result of
the operation to the
G24.
Table 3-81: +CMGS Parameters
<Parameter> Description
<da> Destination address in quoted string. This field contains a single MIN number.
<toda> Type of DA. Value between 128-255 (according to GSM 03.40, 9.1.2.5). If this field is
not given and first character of <da> is '+' , <toda> will be 145, otherwise 129.
<length> Size of message in PDU mode format, in octets, excluding SMSC data.
<mr> Sent message reference number.
PDU Message header and contents in PDU mode format. See description in “+CMGW,
Write Message to Memory” on page 3-127.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola G24 Guide and is the answer not in the manual?

Motorola G24 Guide Specifications

General IconGeneral
BrandMotorola
ModelG24 Guide
CategoryTelephone Accessories
LanguageEnglish

Related product manuals