Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-159
+MEML, List Email Messages
This AT command is used to display a list of all Email messages from chosen folder. The
command returns a series of responses, one per message, and each containing the message
information.
The following table shows the +MEML parameters.
Command
Type
Syntax Response/Action Remarks
Set
AT+MEML=<folder_id> [+MEML: <message_id>,
<status>,<from>,<to>,<cc
>,<bcc>,<subject>,<date>
>,<prior
ity>,<atta
chments
>,<email_size>
...
+MEML: <message_id>,
<status>,<from>,<to>,<cc
>,<bcc>,<subject>,<date>
>,<prior
ity>,<atta
chments
>,<email_size>]
OK
or:
+CME ERROR: <err>
Test
AT+MEML=? +MEML: (list of
supported <folder_id>s)
Table 3-96: +MEML Parameters
<Parameter> Description
<folder_id> The folder from where the user want to list the messages:
0 - Inbox folder
1 - Draft folder
2 - Outbox folder
<message_id> The identity number of the current message.
To Next Page
Loading...
Need help?
General
