Network
3-172 AT Commands Reference Manual December 31, 2007
Example
AT+CGREG=?
+CGREG: (000-002)
OK
AT+CGREG=2
OK
AT+CGREG?
+CGREG: 002,001,2648,988b
OK
AT+CGREG=1
OK
AT+CGREG?
+CGREG: 001,001
OK
AT+CGREG=0
OK
//Example for unsolicited reports:
AT+CGREG=1
OK
AT+CGATT=0
OK
+CGREG: 000
AT+CGATT=1
OK
+CGREG: 002
+CGREG: 001
//Remove GPRS enabled SIM
+CGREG: 000
//Insert GPRS enabled SIM
+CGREG: 002
+CGREG: 001
+COPS, Operator Selection
This command enables accessories to access the network registration information, and the
selection and registration of the GSM network operator. The G24 is registered in the Home
network.
The Enhanced Operator Name String (EONS) feature enables the G24 to return the operator name
displayed on the handset. This feature allows the SIM card to store a mapping of MCC/MNC
code pairs to the displayed operator name. As a result, several operators can share a single
network while having their handsets display their own name as the network operator.
Testing the enhanced ONS feature requires a "SIM ONS" SIM card.
Note: +COPS Test command type execution does not require a SIM card.
To Next Page
Loading...
Need help?
General
